Loading... Please wait...

20 Ton Upside Down Skid Steer Log Splitter Attachment

SSUD20
$1,599.84
$1,474.99
Rating:
Rating: 5 Star(s)
Brand:
Availability:
Limited Time Free Shipping & Tax Free!
Qty:
PayPal Financing Option
  • Product Description
  • Product Reviews

This 20 Ton upside down skid loader log splitter attachment for your front end loader gives you the ability to turn your skid steer into a firewood processor.  Just hook up to the outputs on your machine and you are ready to split wood.  This wood splitter is operated 100% from the cab of your skid steer.  Not more picking up logs by and let the machine do all the work.

Operating pressure of this splitter is only 2500 PSI so you can run your loader in idle and receive the maximum output of this wood splitter.

Please note:  You can customize this log splitter just the way you want it! 

You have two options:

  • 4 Way Wedge - Split logs into 4 pieces.  This 4 way wedge bolts on the slide of the beam.  If ordered, you get both the single head wedge and the 4 way wedge.
  • 32" Opening - Increase your opening size by 6 inches to a 4" x 30" cylinder to split longer pieces of wood.

Made in the USA!

See options above the big green "add to cart" button for pricing and pictures.  As you select them it will built and price your splitter as you go!  Questions? Feel free to contact us at 888-706-2434 for no hassle no pressure help and advice.  We are here to help.

Please note these log splitters are delivered via freight truck.  You will be responsible to take the crate off the back of the truck unless you select lift gate delivery as an option.  Some assembly is required.

Write a review

Write your own product review

  1. Wow

    Posted by B. Snyder on 9th Jul 2013

    Date purchased: 02/15/2011

    Wow. I received the splitter this morning and like I anticipated, I had to assemble the hydraulic hoses. Within 30 min after the truck left I was trying it out with my bobcat 763. I only intended on using it for a few minutes, maybe an hour at the most, since I had other things to do today. Six hours later I had to stop because I was running low on fuel.

    I receive logs from large trees delivered to me from a tree removal service. Anything that is small enough to pick up they keep and sell as firewood. They can't handle the big stuff and they give it to me. For the past 8 yrs I have been flipping up my traditional log splitter into the vertical position and maneuvering the big pieces to it with my bobcat pallet forks. I would have to get off and manually push the control lever and I always end up rolling most by hand. I get a pile done and then finish them off horizontally. This in the past was a pain.

    I sell fire wood also and I haven't been able to keep up with demand because my back won't take it. I have nearly 40 full cords of the large logs already cut to size. Some are up to 3' diameter. They just need to be split.

    In six hours I accomplished what would normally take me 3 or 4 days.......with-out the backache. I was splitting red oak, cherry, locust, and elm. There was nothing this thing wouldn't split. Naturally it was difficult to maneuver the splitter over a very knotty piece with little for it to "bite" onto, but with a little patience I was even able to split these.

    I had difficulty first hooking up the hydraulic hoses, but this was probably due to the fact that nothing had been hooked up to my bobcat for many months and the connections were a little stiff (and frozen).

    This attachment was well worth the price. I would recommend this to anyone. If I were to suggest anything it would be tips on using it efficiently. For example, if you want to pick up a piece to dump in a pile after the final split, you have to be careful not to push the wedge too far. If you do, the piece will split again and fall from the splitter. You have to put just enough pressure on it to pick it up, hover over the pile, then do the final split so it falls in the pile.

    Thanks so much!!

    B. Snyder
    Gull Lake Landscape Co.


  2. Thank you

    Posted by Wilda Collins on 2nd Jun 2013

    This item was shipped out fast, packaged in a custom bilt crate and arrived with out a scratch. To date I have split around 3 cords of wood. The splitter has worked well and I am pleased with it. I would recomend this tool and this company, good job guys ! !


SPECIFICATIONS

Tonnage:
20 Ton (40,000 lbs)
Cylinder:
4" x 24" - Tie rod type
Opening Size:
26 Inch Opening Length
Beam:
5 x 2 Tubular Design
Color:
Black Only
Mounting Plate:
Universal ( 2 quick attach lock handle type)
Weight:
485 lbs
Length:
78 Inches
Wedge :
Single 8" High
Warranty :
1 Year
Hoses & Connectors:
Included - Flat Face Disconnects
Made in USA:
Yes!
4 Way Wedge:
Optional
30" Stroke Cylinder:
Optional 4" x 30"