Free Shipping & No Sales Tax
The Dirty Hand Tools Model 110 100624 Post Hole Digger is for Category 2 and 3 tractors and allows for fast post hole digging with convenient, safe operation from the tractor seat. Quick connect to 6 spline PTO. Carbide, replaceable cutting edge with spiral tip point included.
RanchEx brand 6, 9, 12, 18, and 24 inch augers available for this model (SKU’s 100499, 100500, 100501, 101020, 101021). Pictures shown with bits to illustrate but sold separately as options.
- For use with Category 2 and 3 Tractors and allows for fast post hole digging with convenient, safe operation from the tractor seat.
- Quick Connects to 6 spline PTO.
- Heavy Duty Gear Box and Drive Line.
- RanchEx brand 6, 9, 12, 18, and 24 inch augers available for this model (SKU’s 100499, 100500, 100501, 101020, 101021 ).
- See options for Auger Bits available to fit this unit.
The maximum depth the augers can go depends on the riding height and angle of the tractor and the position of the 3-Point hitch on your particular machine.
Heavy Duty Use Bits (47.75 inches long)
100499 – 6″ diameter
100500 – 9″ diameter
100501 – 12″ diameter
101020 – 18″ diameter
101021 – 24″ diameter
For full details and spec see manual below:
DHT 100624 Operations Manual
Sizing between Cat 0 – 3 is not universal between different tractor manufacturers. For most tractors, the recommended sizing is:
Post Hole Digger Model 90 – Cat 0 — Outside to Outside Width on the A-Frame 20”
Post Hole Digger Model 100 – Cat 1 & 2 — Outside to Outside Width on the A-Frame 25.5”
Post Hole Digger Model 110 – Cat 2 & 3 — Outside to Outside Width on the A-Frame 32”
All diggers come with the CAT 1 pins as whole assemblies. If you need different pins such as cat 0, 2 or 3 pins then that will be the customers responsibility to change out. The sizing between the pins on the tractor should be matched as closely as possible to the Outside to Outside width of the A-Frame to ensure a proper fit. You can use the “recommended Cat sizing” above as a general/rough guide – however this may not apply to every tractor.
Please note about lift gate delivery: You must select the $50 lift gate option if you are not able to unload the freight off the freight truck. You will not have to pay the $50 charge if you can ship to a business and you can unload the crate off the back of the freight truck with a fork lift or something similar. Shipping to a business is your best choice if possible saving you $50. These deliveries are “curb-side” only, please read the details about curb-side, lift gate and residential freight deliveries.
Dirty Hand Tools
3 Point Tractor Attachment Cat 2-3
Auger Bit Diameter:
6,9,12,18,24 in. (Sold Separately)
Yoke fits 6-spline PTO
3:1 Ratio, 2 in. output shaft
Boom / A-Frame:
3-1/4 in. / 2-7/8 in O.D. tubing
Shear Bolt Protection: