Home » Boss Industrial 22 Ton 3 Point Tractor Log Splitter (3PT22T25)
Boss Industrial 22-Ton 3-Point Tractor Log Splitter at Wood Splitter Direct
Boss Industrial 22-Ton 3-Point Tractor Log Splitter at Wood Splitter Direct
Boss Industrial

Boss Industrial 22 Ton 3 Point Tractor Log Splitter (3PT22T25)

$2,099.99
-13% $2,399.99 $2,099.99

Call a log splitter expert at (888) 706-2434 or send us an email. Alternatively, you can chat with us.

Product Description

Limited Time Free Shipping

This 3PT22T25 Boss Industrial 3 point log splitter runs off your tractors hydraulics and will split in both the horizontal or vertical position for the larger logs.

This 3 point wood splitter is fully adjustable for any category 1 or category 2, 3-point hitch size (Pins not included). Working height is from waist level and can be lowered almost to the ground or as low as your 3 PT arms can go.

We recommend your flow rate be a minimum of 8GPM.  Your actual tonnage and split time will depend on your tractors hydraulic output.  Average split times can be from 6-11 seconds.  Exact tonnage will depend on your tractors output.

*Tonnage ratings are rated at "maximum potential" which is 22 tons. Actual PSI of your tractor and other things such as environmental conditions can impact actual tonnage and cycle times.

This log splitter is not for sale in OR, CA or WA.

Please note these log splitters are delivered via freight truck.  You will be responsible to take the crate off the back of the truck unless you select lift gate delivery as an option.  Some assembly is required.

Detailed Specifications

Tonnage:
Up to 22 Ton Depending on tractor
Log Opening:
25 Inch maximum
Split Time:
Depends on your tractor flow rate
Operating Position:
Horizontal or Vertical
Working Height:
Adjustable from 3 point level
Hydraulic Capacity:
1-2 gallons (cylinder & hoses)
Safety Control Valve:
Detent Valve
Weight:
440 lbs
Consumer Warranty:
2 Years Limited
Commercial Warranty:
1 Year Limited
Wedge:
8-Inch High Carbon Steel Wedge
Log Tables / Cradles:
Yes
Hoses & Connectors:
No - Not included
Dimensions:
46"L x 34"W x 22"H
Maximum Pressure/Relief:
3200 PSI

Shipping Disclaimer

Due to rising fuel costs and lack of space on shipping trucks the costs in certain areas have been affected. An "out of area" fee may be necessary. If additional funds are required to fulfill your order we will reach out to you after your order is placed and give you options including possible terminal pick up. (Read more about our shipping policy and how freight shipping works.)

CALIFORNIA PROPOSITION 65 WARNING

Some (not all) of the products we carry can potentially expose you to chemicals including Benzene and Carbon Monoxide, which are known to the State of California to cause cancer and birth defects or other reproductive harms. If you have any questions you can always contact us.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
Tom
Nice log splitter

Overall I’m happy with my purchase. Ordering was easy, pricing was fair (no sales tax is a bonus!), and the shipping was fast. I really like this log splitter. It came mostly assembled and well crated. A few bolts and you’re up and running. This thing is well built and very heavy duty. Splits logs fast (roughly 6 second cycle time) and is very powerful. I like that is has a stand and is easily connected or disconnected. I only have a couple issues. First is that the hoses don’t come with the connectors, (which I understand given the variety of setups) but there is no information available on what is needed. An owners manual is provided on the website, but it just calls for 1/2” NPT quick connects. However the hoses come with female 1/2” seal-lok / ORFS fittings. So you will need a 1/2” male ORFS to 1/2” NPT adapter if you are using typical ISO hydraulic quick connects. These adapters are hard to come by and not generally stocked locally. I had to order my online which led to unnecessary down time. My other issue is the connection to the lower 3 point arms. Again, no hardware is provided for these. I ended up picking up some lower link pins to bolt on to the splitter for ease of use in the future. Once you’re set up you’re good, but knowing this in advance would have been very helpful. Hopefully this helps someone else.