22 GPM Two-Stage Hydraulic Log Splitter Pump - 4000 PSI (WSD31-255)

Regular price $289.99
Regular price -6% $307.99 Sale price $289.99

Call a log splitter expert at (888) 706-2434 or send us an email. Alternatively, you can chat with us (bottom-right corner).

Upgrade or replace your log splitter's hydraulic pump with this 22 GPM 2-Stage Hydraulic Log Splitter Pump. Designed for high-flow hydraulic performance, this heavy-duty pump provides faster cylinder movement and powerful splitting capability for demanding wood-splitting applications.

The two-stage Hi/Lo design combines 16 GPM and 6 GPM gear sets to deliver up to 22 GPM of hydraulic flow. During low-pressure operation, the pump provides increased flow for faster cylinder travel. When additional splitting force is needed, it automatically transitions to a lower-flow, higher-pressure stage.

Featuring a maximum intermittent pressure rating of 4,000 PSI, a durable 5/8-inch keyed shaft, and a clockwise rotation design, this pump is ideal for compatible gas-powered log splitters and custom hydraulic applications.

Key Features

  • 22 GPM Hydraulic Flow: Delivers high-volume hydraulic performance for faster cylinder movement.

  • 2-Stage Hi/Lo Operation: Combines 16 GPM and 6 GPM gear sets for efficient operation under varying loads.

  • 4,000 PSI Maximum Intermittent Pressure: Provides high-pressure capability for demanding splitting applications.

  • 3,000 PSI Continuous Pressure Rating: Designed for continuous operation within the specified pressure limit.

  • 5/8-Inch Keyed Shaft: Features a 3/16-inch keyway for compatible drive connections.

  • 11 HP Minimum Engine Requirement: Designed for use with appropriately sized gasoline engines.

  • Clockwise Rotation: Rotates clockwise when viewed from the shaft end.

  • Versatile Replacement Pump: Suitable for compatible log splitters and other hydraulic equipment.

Specifications

Specification Details
Part Number / SKU 31-255
Pump Type 2-Stage Hydraulic Gear Pump
Maximum Flow Rate 22 GPM
First Gear Set 16 GPM
Second Gear Set 6 GPM
Maximum Intermittent Pressure 4,000 PSI
Maximum Continuous Pressure 3,000 PSI
Maximum Pump Speed 4,000 RPM
Shaft Diameter 5/8"
Shaft Key Size 3/16"
Inlet Port 1" NPT
Outlet Port 3/4" NPT
Minimum Recommended Engine Horsepower Approximately 11 HP
Pump Rotation Clockwise (Viewed from Shaft End)
Pump Configuration 2-Stage Hi/Lo
Primary Application Hydraulic Log Splitters

Applications and Compatibility

This 22 GPM hydraulic pump is suitable for a variety of replacement and custom hydraulic applications, including:

  • Gas-powered hydraulic log splitters

  • Heavy-duty hydraulic log splitters

  • Custom-built log splitting equipment

  • Hydraulic presses

  • Hydraulic power units

  • Other compatible high-flow hydraulic systems

Important: This pump is not a universal direct-fit replacement. Before ordering, verify your existing pump's shaft diameter, rotation direction, mounting configuration, hydraulic port sizes, and engine horsepower requirements.

Frequently Asked Questions

Will this 22 GPM pump fit my log splitter?

This pump may replace hydraulic pumps on compatible gas-powered log splitters. Confirm that the existing pump's shaft, mounting pattern, rotation, and hydraulic connections match before purchasing.

What size engine is required?

An engine rated at approximately 11 HP or greater is recommended for efficient operation. Engine requirements depend on operating pressure and hydraulic load.

What is the advantage of a 2-stage hydraulic pump?

A two-stage pump delivers higher hydraulic flow during low-pressure operation for faster cylinder movement. When splitting resistance increases, the pump automatically transitions to a lower-flow, higher-pressure stage to provide additional splitting force.

What is the maximum pressure rating?

The pump is rated for a maximum intermittent pressure of 4,000 PSI and a maximum continuous operating pressure of 3,000 PSI. The hydraulic system must be equipped with properly rated components and pressure-relief protection.

What size shaft does this pump have?

The pump features a 5/8-inch diameter shaft with a 3/16-inch keyway.

What direction does the pump rotate?

The pump rotates clockwise when viewed from the shaft end. Verify that your engine and drive configuration provide the correct rotation before installation.

What size are the hydraulic ports?

The pump features a 1-inch NPT inlet port and a 3/4-inch NPT outlet port.

Can this pump be used for a custom log splitter build?

Yes. This 22 GPM two-stage pump can be used for custom log splitter applications when paired with an appropriately sized engine, hydraulic cylinder, control valve, reservoir, and compatible hydraulic components.

22 GPM vs. 28 GPM Comparison

Specification

22 GPM (31-255)

28 GPM (31-256)

Maximum Flow

22 GPM

28 GPM

Gear Sets

16 + 6 GPM

21 + 7 GPM

Continuous Pressure

3,000 PSI

3,000 PSI

Intermittent Pressure

4,000 PSI

4,000 PSI

Maximum RPM

4,000

4,000

Shaft Diameter

5/8"

5/8"

Inlet Port

1" NPT

1" NPT

Outlet Port

3/4" NPT

3/4" NPT

Recommended Engine

11+ HP

15+ HP

NOTE: Most products require at least some assembly.

Shipping Disclaimer

Due to rising fuel costs, limited freight capacity, and delivery restrictions in certain areas, some shipments may be subject to an additional remote area, out-of-area or limited-access delivery fee. If additional shipping charges are required to complete your order, we will contact you after the order is placed and provide available options including possible terminal pick up. (Read more about our shipping policy and how freight shipping works.)

CALIFORNIA PROPOSITION 65 WARNING

Some (not all) of the products we carry can potentially expose you to chemicals including Benzene and Carbon Monoxide, which are known to the State of California to cause cancer and birth defects or other reproductive harms. If you have any questions you can always contact us.