30 Ton Skid Steer Flip Flop Log Splitter Attachment (SSFF30)

Two Operating Configurations • 25" Log Opening • Universal Quick Attach • Hoses and Flat-Face Couplers Included

Get the versatility of both an upside-down and horizontal log splitter in one skid steer attachment with the RamSplitter SSFF30 Flip-Flop Log Splitter. The reversible beam design allows the attachment to split logs upside down from inside the skid steer cab or operate horizontally for ground-level firewood processing outside the cab.

Changing configurations requires disconnecting the hydraulic routing, removing four bolts at the universal mounting plate, rotating the beam 180 degrees, and securely reinstalling the hardware. Quick-disconnect fittings are incorporated into the hydraulic system to make the changeover more convenient.

Key Features & Benefits

• 30-Ton Rated Splitting Force
  Designed for demanding hardwood, softwood, storm-cleanup, and property-maintenance applications.
• Reversible Flip-Flop Design
  Configure the beam for upside-down splitting from inside the cab or rotate it for conventional horizontal operation.
• 5" × 24" Hydraulic Cylinder
  The standard cylinder provides a 24-inch stroke and a published 25-inch log opening.
• 10" High Single Wedge
  Provides a tall splitting surface for large rounds and difficult grain patterns.
• Universal Skid Steer Quick Attach
  Fits compatible machines using the common two-locking-handle quick-attach mounting system.
• Hoses and Flat-Face Couplers Included
  Supplied with the hydraulic connections needed for compatible skid steer auxiliary systems.
• 6" × 3" Tubular Beam
  Heavy-duty tubular construction supports demanding log-splitting applications.
• 2,500 PSI Published Operating Pressure
  The product page states that the splitter reaches its intended output at relatively low hydraulic pressure.
• Optional Four-Way Wedge
  Divides compatible logs into four pieces during one stroke and includes both the standard single wedge and bolt-on four-way wedge when selected.
• Optional Extended Log Opening
  A 5" × 30" cylinder option increases the published opening to approximately 32 inches for longer firewood.
• Made in the USA
  Manufactured domestically and backed by a one-year warranty.

Two Splitting Configurations

Upside-Down Operation

In the upside-down configuration, the skid steer operator can approach a log, position the wedge, and split the round without leaving the cab. This setup reduces the need to lift or manually position large, heavy logs on a beam.

It is especially useful for:

• Oversized rounds
• Storm-damaged timber
• Woodlot cleanup
• Land-clearing projects
• Logs that are difficult to lift manually

Horizontal Operation

Rotating the beam 180 degrees converts the SSFF30 into a conventional horizontal splitter. This configuration allows firewood to be placed on the beam and split from outside the skid steer cab.

Horizontal operation may be preferred when:

• Processing manageable firewood rounds
• Using an optional four-way wedge
• Working with an assistant
• Organizing split wood near a trailer or pile

The machine must be shut down and hydraulic pressure relieved before changing configurations. All four mounting bolts must be securely reinstalled and tightened before operation.

Flip-Flop Conversion Process

The attachment changes configurations through the following general process:

1. Park the skid steer on stable, level ground.
2. Lower and securely support the attachment.
3. Shut down the skid steer and relieve auxiliary hydraulic pressure.
4. Disconnect the appropriate quick-connect hydraulic fittings.
5. Remove the four bolts connecting the beam to the universal mounting plate.
6. Rotate the beam 180 degrees.
7. Reinstall and securely tighten all four mounting bolts.
8. Reconfigure the hydraulic lines and in-line valve for the selected position.
9. Inspect all connections before restarting the machine.

Always follow the complete manufacturer instructions rather than relying solely on this summary.

Optional Four-Way Wedge

The optional four-way wedge bolts onto the beam slide and allows compatible straight-grained logs to be divided into four pieces during one stroke.

When this option is selected, the package includes:

• Standard 10-inch single wedge
• Bolt-on four-way wedge

Installing the four-way wedge reduces the available log opening by approximately 3 inches. Irregular, knotted, or oversized wood may still split more effectively with the standard single wedge.

Optional 32" Opening

The standard SSFF30 uses a 5" × 24" cylinder and provides a published 25-inch opening. An optional 5" × 30" cylinder increases the opening for longer firewood pieces.

This extended configuration is marketed with an approximately 32-inch opening. The option should be selected when ordering because it changes the splitter’s cylinder and overall configuration.

Ideal Applications

The RamSplitter SSFF30 is well suited for:

• Farm and ranch firewood processing
• Commercial woodlot work
• Storm-cleanup operations
• Land-clearing projects
• Processing large and heavy rounds
• Municipal property maintenance
• Tree-service operations
• Skid steer owners needing multiple splitting configurations

Quick Specifications

These specifications follow the currently published SSFF30 product information.

Package Contents

• RamSplitter SSFF30 flip-flop log splitter attachment
• Universal skid steer quick-attach mounting plate
• 5" × 24" hydraulic cylinder
• 10-inch single wedge
• Hydraulic hoses
• Flat-face quick-disconnect couplers
• Flip-flop hydraulic routing components

The four-way wedge and 5" × 30" extended-stroke cylinder are included only when selected as options.

Important Compatibility Information

Before ordering, verify that the skid steer has:

• A compatible universal quick-attach system
• Adequate auxiliary hydraulic pressure and flow
• Compatible flat-face hydraulic couplers
• Sufficient lift and operating capacity for a 550 lb. attachment
• Adequate clearance for both splitting configurations
• The correct hydraulic-flow direction and return setup

The Case 1840 requires a different mounting configuration and must be identified when the order is placed.