Banjo 2-Inch Transfer Pump – Honda GX200 Electric Start, 190 GPM (200PH-6-200E)

High-Flow 2-Inch Self-Priming Transfer Pump with Honda GX200 Engine & Electric Start

Move large volumes of water and compatible liquids quickly and efficiently with the Banjo 200PH-6-200E 2-Inch Gas-Powered Transfer Pump. Powered by a dependable Honda GX200 196cc gasoline engine with electric start, this high-performance centrifugal transfer pump delivers up to 190 gallons per minute of rated flow for demanding agricultural, irrigation, and general liquid-transfer applications.

Built with high-strength, corrosion-resistant polypropylene construction, the Banjo 200PH-6-200E is designed to provide long-lasting performance while maintaining a portable, lightweight design.

Its self-priming, V-shaped pump housing helps simplify startup, while the high-performance 5-vane polypropylene impeller provides efficient liquid movement. An EPDM mechanical seal adds durability for use with compatible liquids.

Whether you're transferring water between tanks, filling agricultural equipment, irrigating fields, or managing water around your property, the Banjo 200PH-6-200E offers a practical combination of reliable Honda power, high-volume pumping performance, and corrosion-resistant construction.

Key Features & Benefits

• High-Flow 190 GPM Transfer Capacity: Delivers up to 190 gallons per minute of rated flow, helping move large volumes of liquid efficiently between tanks, reservoirs, and other compatible locations.

• Reliable Honda GX200 Gas Engine: Powered by a dependable 196cc Honda GX200 gasoline engine engineered for consistent performance in demanding outdoor equipment applications.

• Convenient Electric Start: Features an electric starting system for easier engine startup and convenient operation.

• 2-Inch Suction & Discharge Connections: Accommodates compatible 2-inch NPT fittings and plumbing for efficient high-volume liquid transfer.

• Self-Priming Centrifugal Pump Design: Features a specially designed V-shaped pump housing that helps establish suction after the pump casing is properly primed.

• Corrosion-Resistant Polypropylene Housing: High-strength polypropylene construction provides durability and resistance to corrosion from compatible liquids.

• High-Performance 5-Vane Impeller: Features a precision-designed polypropylene impeller for efficient centrifugal pumping performance.

• EPDM Mechanical Seal: Equipped with an EPDM mechanical seal designed for dependable operation with chemically compatible liquids.

• Portable Gas-Powered Operation: Operates without requiring access to an electrical outlet, making it convenient for agricultural fields, remote properties, and outdoor worksites.

• Lightweight 58-Pound Design: Weighing approximately 58 pounds dry, this compact transfer pump can be transported between compatible work locations.

• Versatile Liquid Transfer Applications: Suitable for water transfer, agricultural pumping, irrigation, and selected chemical-transfer applications when fluid compatibility is verified.

• Banjo Pump Quality: Manufactured by Banjo, a recognized supplier of pumps, valves, fittings, and liquid-handling equipment for agricultural and industrial applications.

Powerful Honda GX200 Engine with Electric Start

At the heart of the Banjo 200PH-6-200E is a reliable Honda GX200 gasoline engine.

Featuring 196cc displacement, the Honda GX200 is designed to provide consistent engine performance for demanding outdoor equipment applications.

The electric starting system offers added convenience, allowing operators to start the engine without relying solely on manual recoil starting.

The self-contained, gas-powered configuration makes the pump particularly useful where electrical power is unavailable or impractical.

Engine Highlights:

• Honda GX200 gasoline engine

• 196cc displacement

• Four-stroke engine design

• Electric starting system

• Gas-powered operation

• Suitable for outdoor and remote pumping applications

For farms, rural properties, and remote pumping locations, the Honda GX200 provides a practical power source for moving large volumes of liquid.

190 GPM High-Volume Liquid Transfer Performance

The Banjo 200PH-6-200E features a centrifugal pumping system designed to transfer liquids efficiently through its 2-inch inlet and outlet connections.

With a published flow capacity of 190 gallons per minute, this pump is suitable for applications that require moving substantial volumes of liquid.

Its high-performance 5-vane polypropylene impeller helps maintain efficient fluid movement through the pump housing.

Ideal High-Volume Pumping Tasks:

• Transferring water between storage tanks

• Filling agricultural water tanks

• Supplying compatible irrigation systems

• Moving water between reservoirs

• General farm and property water transfer

• Compatible agricultural liquid-handling operations

Actual pumping performance will depend on suction lift, discharge elevation, hose diameter, plumbing restrictions, and the liquid being transferred.

Corrosion-Resistant Polypropylene Construction

Unlike traditional metal pump housings that may be susceptible to corrosion, the Banjo 200PH-6-200E uses high-strength polypropylene construction.

The durable pump housing is designed to resist corrosion when exposed to compatible liquids, making it particularly useful for agricultural and industrial transfer applications.

The pump also features a polypropylene impeller, helping provide an additional level of corrosion resistance within the pumping system.

Construction Highlights:

• High-strength polypropylene pump housing

• Corrosion-resistant construction

• Durable polypropylene impeller

• EPDM mechanical seal

• Self-priming V-shaped pump design

• Lightweight construction for portable operation

Always verify chemical compatibility before transferring fertilizers, agricultural chemicals, or other liquids. Compatibility depends on the complete pump assembly, including the housing, seals, impeller, and other wetted components.

Self-Priming Design for Convenient Operation

The Banjo 200PH-6-200E features a self-priming V-shaped pump housing designed to simplify the pumping process.

Once the pump casing is properly filled with the required priming liquid, the centrifugal pumping system can help evacuate air from the suction line and establish liquid flow under appropriate operating conditions.

This is especially beneficial when transferring water from tanks, reservoirs, or other sources where the liquid level may be below the pump.

Benefits of the Self-Priming Design:

• Helps simplify pump startup

• Useful for transferring water from lower-level sources

• Designed to establish suction after proper initial priming

• Reduces the need for manually filling the entire suction line

• Convenient for agricultural and general transfer applications

Important: Self-priming does not mean the pump should be operated dry. Always follow the manufacturer's priming instructions before starting the engine.

Ideal Applications

The Banjo 200PH-6-200E is well suited for a variety of water and compatible liquid-transfer applications, including:

• Agricultural water transfer

• Farm and ranch water management

• Lawn and garden irrigation

• Filling and emptying water storage tanks

• Water transfer between reservoirs

• General property maintenance

• Remote water pumping applications

• Compatible agricultural liquid transfer

• General-purpose commercial water transfer

The pump is intended for liquids compatible with its polypropylene construction and EPDM sealing components. It should not be assumed suitable for gasoline, diesel fuel, solvents, or other flammable liquids.

Product Specifications

Frequently Asked Questions

What is the maximum flow rate of the Banjo 200PH-6-200E?

The Banjo 200PH-6-200E has a published transfer capacity of up to 190 gallons per minute. Actual performance will vary depending on suction lift, discharge height, hose configuration, and operating conditions.

What engine powers this Banjo transfer pump?

This pump is equipped with a Honda GX200 196cc gasoline engine, providing dependable gas-powered performance for agricultural and general liquid-transfer applications.

Does the Banjo 200PH-6-200E have electric start?

Yes. The Banjo 200PH-6-200E features an electric starting system for convenient engine startup.

What size are the inlet and outlet connections?

The pump features 2-inch NPT suction and discharge connections designed for compatible liquid-transfer hoses and fittings.

Is the Banjo 200PH-6-200E self-priming?

Yes. The pump features a self-priming V-shaped housing designed to help establish suction after the pump casing has been properly primed.

Always follow the manufacturer's priming instructions and never operate the pump dry.

Can this pump be used to transfer agricultural chemicals?

The Banjo 200PH-6-200E features corrosion-resistant polypropylene construction and an EPDM mechanical seal that may be suitable for certain agricultural liquids.

However, chemical compatibility must be verified before use. Not all fertilizers, pesticides, herbicides, or chemical solutions are compatible with the pump's components.

What type of impeller does this pump use?

The pump uses a high-performance 5-vane polypropylene impeller designed for efficient centrifugal liquid transfer.

Can this pump be used for irrigation?

Yes. The Banjo 200PH-6-200E may be suitable for compatible agricultural, lawn, and garden irrigation systems.

Verify the irrigation system's required water flow and pressure before selecting the pump.

Does this pump require an electrical outlet?

No. The pump operates using a gasoline-powered Honda GX200 engine. The electric starting system uses a starting battery rather than requiring continuous access to household electrical power.

How much does the Banjo 200PH-6-200E weigh?

The pump has a published dry weight of approximately 58 pounds, making it relatively portable for a gas-powered transfer pump of this capacity.

Can this pump transfer gasoline or diesel?

Do not use this pump for gasoline, diesel, or other flammable liquids unless Banjo specifically approves the complete pump and engine configuration for that application. A standard gasoline-engine-driven transfer pump should not be assumed suitable for transferring flammable fuels.

Is this pump intended for dirty water or sewage?

This model is designed primarily for transferring water and other compatible liquids. It is not advertised as a trash pump or sewage pump.

For water containing significant sediment, debris, or solids, select equipment specifically designed for those applications.

Why Choose the Banjo 200PH-6-200E Transfer Pump?

For farms, irrigation systems, rural properties, and commercial liquid-transfer operations, the Banjo 200PH-6-200E delivers an excellent combination of hydraulic pumping performance, reliable Honda power, and corrosion-resistant construction.

Its 190 GPM rated transfer capacity, Honda GX200 engine, electric start, 2-inch connections, and durable polypropylene pump housing make it a practical choice for a wide range of demanding applications.

Whether you're moving water between tanks, maintaining an irrigation system, or handling other compatible liquids, the Banjo 200PH-6-200E is designed to help you complete the job efficiently.