VEVOR 62cc Gas Chainsaw with 20" Guide Bar and 3.8 HP Engine (CN-62G)

62cc 2-Stroke Engine • 20" Guide Bar • 3.8 HP Power • Up to 18" Cutting Capacity

Take on firewood preparation, tree trimming, storm cleanup, and property maintenance with the VEVOR CN-62G Gas Chainsaw. Powered by a 62cc, 3.8 HP 2-stroke engine, this saw reaches a maximum engine speed of 12,000 RPM for the cutting power needed to handle thick branches and medium-to-large logs.

The included 20-inch guide bar provides extended cutting reach, while the manufacturer-rated 18-inch maximum cutting diameter makes the saw suitable for demanding woodcutting projects around homes, farms, and rural properties.

Powerful 62cc Cutting Performance

The 62cc engine produces 3.8 HP, or 2.8 kW, giving the saw the power needed for clearing fallen limbs, cutting firewood, trimming trees, and processing logs. The engine operates at approximately 7,000 RPM and can reach a maximum speed of 12,000 RPM.

Key Features & Benefits

• 62cc 2-Stroke Gas Engine
  Delivers 3.8 HP of cutting power for demanding outdoor woodcutting applications.
• 20-Inch Guide Bar
  Provides the reach needed to cut larger branches, trunks, and logs.
• Up to 18-Inch Cutting Capacity
  Manufacturer-rated to cut wood measuring up to 18 inches in diameter.
• Cold and Hot Starting Controls
  Separate choke and starting controls help prepare the engine for different operating temperatures.
• Extended Pull-Rope Design
  Designed to make pull-starting the engine more manageable.
• Emergency Stop Lever
  Allows the operator to quickly shut down the engine when necessary.
• Protective Hand Guard
  Helps shield the operator from flying wood chips and debris during cutting.
• Side Chain-Tension Adjustment
  Makes it easier to maintain proper chain tension for smoother cutting and reduced component wear.
• Non-Slip Handle
  Provides a more secure grip and improved control while operating the saw.
• Reinforced Composite Housing
  PA6 composite reinforced with 30% glass fiber is designed to resist impacts and elevated operating temperatures.
• Separate Fuel and Chain-Oil Reservoirs
  A 550 ml fuel tank and 260 ml chain-oil tank support longer cutting sessions between refills.
• Adjustable Chain Lubrication Support
  The dedicated chain-oil reservoir helps keep the bar and chain lubricated during operation.

Built for Larger Woodcutting Jobs

The combination of a 20-inch guide bar and high-output gas engine makes this chainsaw suitable for jobs that may be too demanding for smaller electric or battery-powered saws. Its longer bar can reduce the need to repeatedly reposition the saw when working through larger logs.

Ideal Applications

The VEVOR 62cc gas chainsaw is well suited for:

• Cutting and processing firewood
• Trimming large tree branches
• Cutting fallen trees and storm debris
• Clearing wooded property
• Farm and ranch maintenance
• Cutting logs up to the manufacturer-rated capacity
• Seasonal yard and land maintenance

Quick Specifications

The chain pitch, drive-link count, guide-bar material, fuel mixture, capacities, engine data, and dimensional specifications above are taken from VEVOR’s published product specifications and manufacturer responses.

Starting System

The saw is designed for both cold and warm starting conditions. Its starting controls include a choke switch, engine start switch, and pull rope.

Always follow the manufacturer’s starting sequence. Before attempting to start the saw, verify that:

• The correct fresh fuel mixture is being used
• The chain brake and controls are in the proper positions
• The air filter is clean
• The spark plug is properly installed
• The guide bar and chain are correctly mounted and tensioned

Fuel and Lubrication Requirements

This chainsaw requires a 40:1 mixture of gasoline and approved 2-stroke engine oil. The manufacturer specifies 2-stroke lubricating oil rated FB or higher.

The chain-oil tank is separate from the engine’s mixed-fuel tank. Fill the chain-oil reservoir with suitable bar-and-chain oil before operating the saw. Never operate the saw without proper chain lubrication.

Replacement Chain Information

The manufacturer lists the original chain configuration as:

• 20-inch chain
• 0.325-inch pitch
• 76 drive links

Confirm the chain gauge and all other fitment measurements before purchasing a replacement chain, since chain length alone does not guarantee compatibility.

Important Safety Information

Chainsaws can cause serious injury when used improperly. Read and follow the complete operator’s manual before assembly, fueling, adjustment, or operation.

Always wear appropriate protective equipment, including:

• Chainsaw chaps or cut-resistant leg protection
• Safety glasses and a face shield
• Hearing protection
• Heavy-duty gloves
• Protective footwear
• An approved helmet when working around trees or overhead limbs

Do not operate the chainsaw indoors or in enclosed spaces. The gas engine produces carbon monoxide. Inspect the chain, bar, chain brake, fasteners, and lubrication system before each use.