Yardbeast 2510 2.5-Inch Wood Chipper with 9.5 HP Kohler Engine - 2510KOH

Built for homeowners, property managers, and landscaping professionals who need more durability than a typical consumer chipper, the Yardbeast 2510 combines a true 2.5-inch chipping capacity with a professional-grade Kohler Command PRO engine and heavy-gauge steel construction.

A dedicated side hopper handles branches up to 2.5 inches in diameter, while the upper hopper processes leaves and smaller twigs. The wagon-style frame, four pneumatic tires, and extended hand-tow bar make the machine easier to move around a property.

Why Choose the Yardbeast 2510?

• True 2.5-inch branch chipping capacity
• Professional-grade 9.5 HP Kohler Command PRO engine
• 277cc four-cycle gasoline engine
• Separate feeds for branches and lighter yard debris
• D2 tool-steel cutting blade
• Up to 10:1 reduction ratio
• Heavy-duty Hilliard centrifugal clutch
• Split chipper housing provides easier blade and rotor access
• Heavy-gauge welded steel construction
• Four-wheel wagon-style frame for property mobility
• Fixed discharge chute directs chips away from the work area
• CARB-compliant engine configuration

Two Ways to Process Yard Debris

Side Chipping Hopper

The wide side hopper accepts branches up to 2.5 inches in diameter. Its short, open design accommodates limbs with smaller side branches, potentially reducing the amount of pruning required before chipping.

Upper Shredding Hopper

The upper hopper is designed for leaves and smaller yard debris. It can also process twigs up to approximately 3/4 inch in diameter.

Kohler Command PRO Power

The Yardbeast 2510 is powered by a 277cc Kohler CH395 Command PRO engine delivering 9.5 horsepower and 13.9 ft-lb of torque.

Engine features include:

• Recoil starting system
• Low-oil shutdown protection
• Quad-Clean cyclonic air filtration
• Cast-iron cylinder liner
• Large-capacity fuel tank
• Air-cooled, single-cylinder design
• CARB-compliant emissions configuration
• Maximum operating speed of 3,600 RPM

Heavy-Duty Cutting System

A single D2 tool-steel blade is mounted to a 13-inch flywheel and 16-pound rotor. The D2 blade provides excellent wear resistance and longer working intervals between sharpening when properly maintained.

The rotor turns at approximately 3,000 RPM. A 3/8-inch heat-treated steel anvil helps guide branches toward the cutting blade for efficient gravity-fed operation.

Hilliard Centrifugal Clutch

A heavy-duty Hilliard centrifugal clutch transfers power from the engine to the rotor. It engages at approximately 1,800 RPM, allowing the engine to start without the immediate load of the cutting system.

The clutch also helps protect the engine from sudden shock loads caused by difficult material or chipping stalls.

Easy Blade and Rotor Access

The split chipper housing opens to provide direct access to the blade and rotor. This makes it easier to:

• Inspect the blade before operation
• Check blade condition and fasteners
• Remove tangled material
• Perform routine cleaning
• Sharpen or replace the blade

Always shut down the engine, allow the rotor to stop completely, and disconnect the spark plug before opening or servicing the chipper housing.

Wagon-Style Mobility

The Yardbeast 2510 rides on four 10-inch pneumatic tires and includes a 37.5-inch hand-tow bar. This wagon-style arrangement makes it easier to move the 232-pound machine around lawns, driveways, gardens, and other relatively level areas.

The wheels and tow bar are intended for moving the machine by hand around a property. This is not a highway-towable wood chipper.

Technical Specifications

Shipping Information

The Yardbeast 2510 ships by LTL freight in a protective metal shipping cage.

The carrier will typically contact the customer to arrange a delivery appointment. Inspect the shipping cage and machine for visible freight damage before accepting delivery.

Warranty

Yardbeast provides a two-year limited residential warranty against defects in materials and workmanship for qualifying use within the continental United States.

Normal wear components—including belts, tires, blades, anvils, clutches, and bearings—receive separate 90-day coverage. After that period, wear components are covered during the remaining warranty term only when failure is caused by a defect in materials or workmanship.

Commercial users receive a limited one-year or 1,000-hour warranty. The Kohler engine and centrifugal clutch are covered separately by their respective manufacturers.

Warranty coverage is subject to proper operation, maintenance, and the complete manufacturer terms.

What’s Included?

• Yardbeast 2510 wood chipper
• Kohler CH395 engine
• D2 tool-steel chipper blade
• Upper and side feed hoppers
• Fixed discharge chute
• Four-wheel wagon frame
• Pneumatic tires
• Hand-tow bar
• Assembly hardware
• Operator’s manual

Recommended Uses

The Yardbeast 2510 is suitable for:

• Storm cleanup
• Tree and shrub pruning
• Residential property maintenance
• Orchard and garden cleanup
• Processing branches into landscaping chips
• Reducing leaves and smaller yard debris
• Producing material for mulch or compost piles

Important Operating Guidance

Maximum capacity depends on the species, moisture content, shape, knots, and condition of the material. Hardwood, extremely dry wood, forked branches, and heavily knotted limbs may need to be smaller than the rated 2.5-inch capacity.

Do not feed lumber, roots covered in soil, vines, rocks, metal, plastic, pressure-treated wood, or other foreign material into the chipper.

Always wear eye protection, hearing protection, gloves, sturdy footwear, and close-fitting clothing. Read the operator’s manual completely before assembly or operation.

Frequently Asked Questions

What is the actual maximum branch capacity?

The current Yardbeast specifications and product brochure rate the 2510 for branches up to 2.5 inches in diameter.

Can it shred leaves?

Yes. The upper hopper is designed for leaves, smaller yard debris, and twigs up to approximately 3/4 inch in diameter.

Is this a self-feeding chipper?

The 2510 is a gravity-feed machine. The rotor’s cutting action can help draw properly prepared branches into the hopper, but it does not have a powered hydraulic feed system.

What is the reduction ratio?

Yardbeast lists a reduction ratio of up to 10:1, meaning approximately ten containers of suitable loose yard debris can be reduced to about one container of processed material. Actual results depend on the material.

Does it have an electric starter?

No. The Kohler CH395 engine uses a manual recoil starting system.

Is the chipper highway towable?

No. The four-wheel frame and tow bar are designed for moving the machine by hand around a property. They are not designed for towing behind a road vehicle.

Does it arrive fully assembled?

No. Assembly is required, and the necessary tools must be supplied by the owner.

Is the engine shipped with oil?

Check the engine before starting and add the oil specified in the Kohler manual if necessary. Never assume a new engine contains operating oil.

How often does the blade need sharpening?

Sharpening frequency depends on operating hours and the material being processed. Inspect the cutting edge regularly and immediately after striking an obstruction. A dull blade reduces performance and places additional load on the drive system.

Can it process wet leaves?

Small amounts of damp material may process, but wet leaves can clump and restrict the hopper or discharge. Drier material generally produces better results and fewer blockages.

YARDBEAST 2510 User Manual